Tundra 4WD V8-4.6L (1UR-FE) (2010)
for bolt C - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL REAR SEAT BELT RETRACTOR COVER
(a) Attach the 2 claws and 2 clips to install the cover.
4. INSTALL REAR SEAT ASSEMBLY
(a) Install the rear seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for Double
Cab)/Installation.
5. CONNECT CENTER REAR SEAT OUTER BELT ASSEMBLY
(a) Connect the rear seat center seat outer belt with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
Components
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for CrewMax): COMPONENTS