Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-2513024.png)
between other parts.
(d) Check that there is no looseness in the installation parts of the side airbag sensor.
(e) Connect the connector.
9. INSTALL FRONT DOOR SCUFF PLATE LH (for Rear Side) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (For Regular Cab)/Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.
Components
SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY (for Column Shift Type): COMPONENTS