Tundra 4WD V8-4.6L (1UR-FE) (2010)
HINT
The type of claw on the top and bottom of the sensor are different. Observe the claws carefully before removing the sensor.
14. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER
(a) Detach the 2 claws and remove the sensor retainer from the rear bumper.
Installation
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear Side): INSTALLATION
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
(a) Align the keyhole and protrusion as shown in the illustration.
(b) Install the sensor retainer to the rear bumper.
NOTICE:
Do not damage the bumper with the protrusion when installing the retainer.
2. INSTALL NO. 1 ULTRASONIC SENSOR
(a) Attach the 2 claws to install the ultrasonic sensor.