Tundra 4WD V8-4.6L (1UR-FE) (2010)
(c) Disconnect the connector (labeled D).
(d) Remove the connector (labeled D) from the skid control sensor clamp (labeled H).
(e) Remove the 2 bolts (labeled E) and 2 harness clamps (labeled F).
(f) Remove the bolt (labeled G) and skid control sensor clamp (labeled H).
7. REMOVE FRONT SPEED SENSOR RH
(a) Remove the hexagon socket head cap bolt (labeled A) and speed sensor (labeled B) from the knuckle.
8. REMOVE FRONT SKID CONTROL SENSOR CLAMP RH
(a) Remove the bolt (labeled C) and skid control sensor clamp (labeled D) from the knuckle.
Installation
BRAKE CONTROL: FRONT SPEED SENSOR: INSTALLATION
1. INSTALL FRONT SKID CONTROL SENSOR CLAMP LH
(a) Install the skid control sensor clamp (labeled A) with the bolt (labeled B).
Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)
NOTICE:
Install the bracket so that the rotation stopper (labeled C) touches the knuckle.