Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-648002.png)
Tape the screwdriver tip before use.
(b) Remove the regulator switch.
Installation
WINDSHIELD / WINDOWGLASS: BACK POWER WINDOW SWITCH: INSTALLATION
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Attach the 2 claws to install the regulator switch.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
3. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
4. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Installation
5. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for CrewMax)/Installation