Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Remove the exhaust manifold RH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and Repair/Removal.
2. REMOVE STARTER COVER
(a) Remove the 3 bolts and starter cover.
3. REMOVE STARTER ASSEMBLY
(a) Disconnect the 2 wire harness clamps.
(b) Disconnect the starter connector.
(c) Remove the nut and disconnect the starter wire.
(d) Remove the 2 bolts and starter.