Tundra 4WD V8-4.6L (1UR-FE) (2010)
No further tightening is required once the nut is tightened with the specified torque.
2. INSTALL WHEEL
for Aluminum Wheel - Torque : 131 Nm (1336 kgf-cm, 97 ft-lbf)
for Steel Wheel - Torque : 209 Nm (2131 kgf-cm, 154 ft-lbf)
3. INSPECT TIRE
(a) Inspect the tire See: Wheels and Tires/Testing and Inspection/Component Tests and General Diagnostics.
4. REGISTRATION OF TRANSMITTER ID
(a) Register the transmitter ID See: Wheels and Tires/Tire Monitoring System/Testing and Inspection/Programming and Relearning/Registration
.
5. PERFORM INITIALIZATION
(a) Perform initialization See: Wheels and Tires/Tire Monitoring System/Testing and Inspection/Programming and Relearning/Initialization.
NOTICE:
Be sure to inflate all tires to the proper inflation pressure before initialization.
6. CHECK TIRE PRESSURE AFTER REPAIRS
(a) After repairs, confirm that the actual tire pressures are displayed in the DATA LIST See: Wheels and Tires/Tire Monitoring System/Testing
and Inspection/Scan Tool Testing and Procedures/Data List / Active Test.