Tundra 4WD V8-4.6L (1UR-FE) (2010)
Steering Gear: Overhaul
Disassembly
POWER STEERING: STEERING GEAR: DISASSEMBLY
1. FIX POWER STEERING GEAR ASSEMBLY
(a) Using SST, secure the power steering gear.
SST : 09612-00012
HINT
Tape SST before use.
NOTICE:
When using a vise, do not overtighten it.
2. REMOVE TIE ROD END SUB-ASSEMBLY LH
(a) Put matchmarks on the tie rod end LH and steering rack end.
3. REMOVE TIE ROD END SUB-ASSEMBLY RH
HINT
Use the same procedures described for the LH side.
4. REMOVE STEERING RACK BOOT CLIP
(a) Using pliers, remove the 2 steering rack boot clips.
5. REMOVE NO. 2 STEERING RACK BOOT CLAMP
(a) Using pliers, remove the 2 boot clamps as shown in the illustration.