Tundra 4WD V8-4.6L (1UR-FE) (2010)
Suspension Strut / Shock Absorber: Overhaul
Disassembly
SUSPENSION: FRONT SHOCK ABSORBER: DISASSEMBLY
1. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Using SST, compress the coil spring.
SST : 09727-30021
09727-00010
09727-00021
09727-00031
NOTICE:
*
Make sure that the suspension support is free from the coil spring.
*
Do not compress the coil spring more than necessary.
*
Do not use an impact wrench. It will damage SST.
*
Do not place yourself over the top of the shock absorber.
CAUTION:
Be careful as the coil spring may spring upward and cause an injury.
(b) Remove the front support to front shock absorber nut.
2. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH
(a) Remove the suspension support, 2 retainers and 2 cushions from the shock absorber rod.
3. REMOVE FRONT COIL SPRING LH
(a) Remove the coil spring from the shock absorber.
Reassembly
SUSPENSION: FRONT SHOCK ABSORBER: REASSEMBLY
1. INSTALL FRONT COIL SPRING LH