Tundra 4WD V8-4.6L (1UR-FE) (2010)
Suspension Strut / Shock Absorber: Testing and Inspection
Rear Shock Absorber
SUSPENSION: REAR SHOCK ABSORBER: INSPECTION
1. INSPECT REAR SHOCK ABSORBER ASSEMBLY LH
(a) Compress and extend the shock absorber rod 4 times or more. Check that there is no abnormal resistance or unusual sound during the
operation.
If there is any abnormality, replace the shock absorber assembly with a new one.
NOTICE:
*
When disposing of the shock absorber, see DISPOSAL See: Service and Repair/Removal and Replacement/Rear Shock
Absorber/Disposal
*
Do not hold the rear shock absorber by the dust cover, as the dust cover will come off.