Toyota Workshop Service and Repair Manuals > Tundra 4WD V8-4.6L (1UR-FE) (2010) > Transmission and Drivetrain | Automatic Transmission/Transaxle | Shift Linkage, A/T | Shift Cable, A/T | Component Information | Service and Repair | Transmission Control Cable (for Column Shift Type)

Page 7

/ Instrument Panel/Service and Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation

13. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For

Regular Cab)/Installation

14. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) See: Body and Frame/Interior Moulding / Trim/Headliner/Service

and Repair/Roof Headlining (For Double Cab)/Installation

15. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Roof Headlining (For Regular Cab)/Installation

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Toyota Workshop Service and Repair Manuals