Tundra 4WD V8-4.6L (1UR-FE) (2010)
7. DISCONNECT NO. 1 SHIFT LOCK PLATE SUB-ASSEMBLY
(a) Using a pin-punch and hammer, tap out the spring pin and disconnect the shift lock plate from the shift lock solenoid.
8. REMOVE TRANSMISSION CONTROL SWITCH (S POSITION)
(a) Remove the 2 screws and switch from the column shift control shift lever retainer.
(b) Insert a thin-bladed screwdriver, release the locking lug of terminal 6 (IG) and 13 (S), and pull the terminals out from the rear.