Tundra 4WD V8-4.6L (1UR-FE) (2010)
9. REMOVE TRANSMISSION CONTROL SWITCH (P POSITION)
(a) Remove the 2 screws and switch from the column shift control shift lever retainer.
Reassembly
A760F AUTOMATIC TRANSMISSION: SHIFT LEVER ASSEMBLY (for Column Shift Type): REASSEMBLY
1. INSTALL TRANSMISSION CONTROL SWITCH (P POSITION)
(a) Install the switch to the column shift control shift lever retainer with the 2 screws.
2. INSTALL TRANSMISSION CONTROL SWITCH (S POSITION)
(a) Apply MP grease to the switch as shown in the illustration.
(b) Install the switch to the column shift control shift lever retainer with the 2 screws.