Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1594004.png)
(c) If the result is not as specified, replace the solenoid valve.
6. INSPECT SHIFT SOLENOID VALVE SL2
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.
OK:
(c) If the result is not as specified, replace the solenoid valve.
7. INSPECT SHIFT SOLENOID VALVE SR
