Tundra 4WD V8-4.6L (1UR-FE) (2010)
4. INSTALL PROPELLER SHAFT ASSEMBLY
(a) Install the propeller shaft for 2WD See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft Assembly/Installation.
(b) Install the propeller shaft for 4WD See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft Assembly/Installation.
5. ADD DIFFERENTIAL OIL See: Fluid - Differential/Service and Repair
6. INSTALL REAR WHEEL
(a) Install the rear wheels.
for aluminum wheel - Torque : 131 Nm (1336 kgf-cm, 97 ft-lbf)
for steel wheel - Torque : 209 Nm (2131 kgf-cm, 154 ft-lbf)
Components
DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD): COMPONENTS