Tundra 4WD V8-4.6L (1UR-FE) (2010)
HINT
First fit a washer with the same thickness as the removed washer, and then check the tooth contact pattern. Replace the washer with
one of a different thickness if necessary.
(b) Using SST and a press, press in the rear bearing (inner race).
SST : 09506-35010
10. INSPECT DIFFERENTIAL DRIVE PINION PRELOAD
(a) Install the drive pinion, front bearing (inner race) and oil slinger.
HINT
Assemble the spacer and oil seal after adjusting the gear contact pattern.
(b) Using SST, install the companion flange.
SST : 09950-30012
09951-03010
09953-03010
09954-03010
09956-03050
SST : 09955-03050
(c) Using SST to hold the companion flange.