Tundra 4WD V8-4.6L (1UR-FE) (2010)
09954-03010
09955-03030
09956-03020
7. REMOVE FRONT DIFFERENTIAL CARRIER OIL SEAL
(a) Using SST, remove the oil seal.
SST : 09308-10010
8. REMOVE FRONT DIFFERENTIAL DRIVE PINION OIL SLINGER
9. REMOVE FRONT DIFFERENTIAL CROSS SHAFT BEARING RETAINER
(a) Remove the bolts B and front differential front support assembly LH.
(b) Remove the bolts A.
(c) Using a plastic-faced hammer, tap out the bearing retainer.
10. REMOVE DIFFERENTIAL CASE ASSEMBLY
(a) Remove the differential case from the differential carrier.
11. REMOVE DIFFERENTIAL DRIVE PINION
(a) Set the differential carrier to an overhaul stand as shown in the illustration.