Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-1607046.png)
Standard Drive Pinion Preload Plus:
39. INSPECT BACKLASH BETWEEN DIFFERENTIAL RING GEAR AND DIFFERENTIAL DRIVE PINION
(a) Using SST and a dial indicator, measure the ring gear backlash.
SST : 09564-33010
Standard backlash:
0.17 to 0.27 mm (0.00670 to 0.0106 in.)
40. INSPECT RUNOUT OF FRONT DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
(a) Using a dial indicator, measure the runout of the companion flange vertically and laterally.
Maximum runout:
(b) If the runout is greater than the maximum, replace the companion flange.
41. STAKE FRONT DRIVE PINION COMPANION FLANGE FRONT NUT
