toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drivetrain - Front End Grinding Noise In 4WD|Page 5130 > < Drivetrain - Front End Grinding Noise In 4WD|Page 5124
Page 1
background image

Differential Mount: Customer Interest
Drivetrain - Front End Grinding Noise In 4WD

T-SB-0338-09

Rev1

September 16, 2009

Grinding Noise When in 4WD

Service Category
Drivetrain

Section
Axle/Differential

Market
USA

Applicability

March 10, 2010 Rev1:

^

Applicability has been updated to include 2008 - 2010 model year Sequoia vehicles.

^ Production Change Information has been added.

Any previous printed versions of this service bulletin should be discarded.

Introduction

Some 2008 - 2010 model year Sequoia and 2007 - 2010 model year Tundra vehicles may exhibit a grinding noise from the front of the vehicle while in
4WD. An updated differential support bolt is available to address this condition. Follow the repair procedure in this bulletin to inspect and replace the
differential support bolt.

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,
from the vehicle's in-service date.

^

Warranty application is limited to occurrence of the specified condition described in this bulletin.

Drivetrain - Front End Grinding Noise In 4WD|Page 5130 > < Drivetrain - Front End Grinding Noise In 4WD|Page 5124