Tundra 4WD V8-4.6L (1UR-FE) (2010)
2. REMOVE PROPELLER SHAFT ASSEMBLY
(a) Remove the propeller shaft for 2WD See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft Assembly/Removal.
(b) Remove the propeller shaft for 4WD See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and
Replacement/Propeller Shaft Assembly/Removal.
3. REMOVE REAR DRIVE PINION NUT
(a) Using SST and a hammer, loosen the staked part of the nut.
SST : 09930-00010
(b) Using SST to hold the companion flange, remove the nut.
SST : 09330-00021
09330-00030
4. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
(a) Using SST, remove the companion flange.
SST : 09950-30012
09951-03010
09953-03010
09954-03010
09956-03050
SST : 09955-03050