Toyota Workshop Service and Repair Manuals

SST : 09502-12010

SST : 09316-60011

09316-00041

Standard oil seal depth:

5.6 to 6.6 mm (0.221 to 0.260 in.)

(b) Coat the lip of the oil seal with MP grease.

20. INSTALL FRONT DRIVE PINION COMPANION FLANGE FRONT SUB-ASSEMBLY   See: Differential Carrier/Service and

Repair/Overhaul/Front Differential Carrier Assembly/Reassembly

21. INSPECT DIFFERENTIAL DRIVE PINION PRELOAD   See: Differential Carrier/Service and Repair/Overhaul/Front Differential Carrier

Assembly/Reassembly

22. INSPECT TOTAL PRELOAD   See: Differential Carrier/Service and Repair/Overhaul/Front Differential Carrier Assembly/Reassembly

23. STAKE FRONT DRIVE PINION COMPANION FLANGE FRONT NUT   See: Differential Carrier/Service and Repair/Overhaul/Front

Differential Carrier Assembly/Reassembly

24. INSTALL DIFFERENTIAL SIDE GEAR INTER SHAFT SUB-ASSEMBLY   See: Differential Carrier/Service and Repair/Overhaul/Front

Differential Carrier Assembly/Reassembly

25. INSTALL FRONT DIFFERENTIAL TUBE ASSEMBLY   See: Differential Carrier/Service and Repair/Overhaul/Front Differential Carrier

Assembly/Reassembly

26. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY

(a) Install the front differential carrier    See: Differential Carrier/Service and Repair/Removal and Replacement/Front Differential Carrier

Assembly/Installation.

27. ADD DIFFERENTIAL OIL   See: Fluid - Differential/Service and Repair