Tundra 4WD V8-4.6L (1UR-FE) (2010)
(2) Subtract the angle of the transfer flange (A) measured before installing the propeller shaft from the angle of the intermediate shaft (C) to
calculate the No. 1 joint angle.
No. 1 joint angle:
Angle of intermediate shaft (C) - Angle of transfer flange (A)
Measured Value (Reference):
HINT
*
Using the following chart, check if the calculated No. 1 joint angle is within the specified value.
*
The tolerance is +/-0°60' (1.00°).
Standard No. 1 joint angle: