Tundra 4WD V8-4.6L (1UR-FE) (2010)
*
Use new snap rings.
*
If possible, use snap rings of the same thickness for both sides.
(f) Temporarily install the universal joint spider and 2 universal joint spider bearings into the propeller shaft yoke.
(g) Using SST, press the universal joint spider bearing into the propeller shaft yoke until the groove can be seen.
SST : 09950-40011
09951-04020
09952-04010
09953-04020
09954-04020
09955-04051
09957-04010
SST : 09950-60010
09951-00290
SST : 09336-16010
NOTICE:
Confirm that the universal joint spider moves smoothly while pressing in the bearing.
(h) Using needle-nose pliers, install the previously selected snap ring into the groove of the yoke.
HINT
Use the same installation procedure for the universal joint spider bearing on the opposite side.
(i) Align the matchmarks on the propeller shaft yoke and universal joint yoke, and temporarily install the spider and 2 universal joint spider
bearings into the universal joint yoke.
(j) Using SST, press the universal joint spider bearing into the universal joint yoke until the groove can be seen.
SST : 09950-40011