Tundra 4WD V8-4.6L (1UR-FE) (2010)
Power Window Switch: Testing and Inspection
Power Window Master Switch
WINDSHIELD / WINDOWGLASS: POWER WINDOW MASTER SWITCH: ON-VEHICLE INSPECTION
1. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/o Jam Protection Function)
(a) for Regular Cab:
(1) Remove the master switch See: Service and Repair/Power Window Master Switch/Removal.
(2) Reconnect the switch connector.
(3) Measure the voltage according to the value(s) in the table below.
Standard voltage:
(b) for Double Cab:
(1) Remove the power window regulator master switch See: Service and Repair/Power Window Master Switch/Removal.
(2) Reconnect the switch connector.
(3) Measure the voltage according to the value(s) in the table below.
Standard voltage: