Tundra 4WD V8-4.6L (1UR-FE) (2010)
HINT
Use the same procedures described for the LH side.
4. REMOVE REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Crewmax LH Side)/Removal
5. REMOVE REAR SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
Crewmax RH Side)/Removal
6. REMOVE REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for CrewMax)/Removal
7. REMOVE REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for CrewMax)/Removal
8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
(a) Partially remove the rear door opening trim weatherstrip LH so that the lower quarter trim panel LH and front quarter trim panel LH can be
removed See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for CrewMax)/Removal.
9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT
Use the same procedures described for the LH side.
10. REMOVE BACK PANEL TRIM RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Removal
11. REMOVE BACK PANEL TRIM LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Removal
12. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (for CrewMax)/Removal
13. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (for CrewMax)/Removal
14. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (for CrewMax)/Removal
15. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (for CrewMax)/Removal
16. REMOVE ASSIST GRIP SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Removal
17. REMOVE ASSIST GRIP PLUG See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Removal
18. TEMPORARILY REMOVE ROOF HEADLINING ASSEMBLY
(a) It is not necessary to completely remove the roof headlining. Slightly lower the rear section of the roof headlining See: Body and
Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for CrewMax)/Removal so that the back window glass can be
removed in a later step.
19. REMOVE BACK DOOR SERVICE HOLE COVER
(a) Remove the back window regulator connector labeled A.
(b) Remove the 12 bolts and nut.
(c) Lift the cover upwards to detach the claw labeled B. Then slide the cover to the left to disengage the retainer labeled C and remove the cover.
NOTICE:
When the cover is removed, the cover may fall and become deformed.