Tundra 4WD V8-4.6L (1UR-FE) (2010)
(a) Using a brush or sponge, apply Primer M to the exposed part of the vehicle body.
NOTICE:
*
Allow the primer to dry for 3 minutes or more.
*
Do not apply primer to the adhesive.
*
Throw away any leftover primer.
*
Do not apply too much primer.
(b) Using a brush or sponge, apply Primer G to the contact surface of the back window.
HINT
If primer is applied to an area that is not specified, wipe off the primer with a non-residue solvent before it dries.
NOTICE:
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
*
Do not apply too much primer.
(c) Apply adhesive to the back window.