Tundra 4WD V8-4.6L (1UR-FE) (2010)
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): REMOVAL
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH
(a) for Double Cab:
Remove the rear door inside handle bezel plug LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear
Door (for Double Cab)/Disassembly.
(b) for CrewMax:
Remove the rear door inside handle bezel plug LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear
Door (for CrewMax)/Disassembly.
3. REMOVE REAR UPPER DOOR ARMREST BASE PANEL LH
(a) for Double Cab:
Remove the rear upper door armrest base panel LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear
Door (for Double Cab)/Disassembly.
(b) for CrewMax:
Remove the rear upper door armrest base panel LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear
Door (for CrewMax)/Disassembly.
4. REMOVE REAR DOOR FRAME GARNISH LH
(a) for Double Cab:
Remove the rear door frame garnish LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door (for
Double Cab)/Disassembly.
(b) for CrewMax:
Remove the rear door frame garnish LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door (for
CrewMax)/Disassembly.
5. REMOVE COURTESY LIGHT ASSEMBLY
(a) for Double Cab:
Remove the courtesy light assembly See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door (for
Double Cab)/Disassembly.
(b) for CrewMax:
Remove the courtesy light assembly See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear Door (for
CrewMax)/Disassembly.
6. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
(a) for Double Cab:
Remove the rear door trim board sub-assembly LH See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Rear
Door (for Double Cab)/Disassembly.