Tundra 4WD V8-4.6L (1UR-FE) (2010)
/Page-3345001.png)
Windshield Washer Motor: Service and Repair
Removal
WIPER AND WASHER: WASHER MOTOR: REMOVAL
1. REMOVE WINDSHIELD WASHER JAR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the clip and 3 bolts. Then remove the washer jar.
2. DRAIN WASHER FLUID
(a) Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.
3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
(a) Pull out the washer motor and pump from the packing of the washer jar to remove it.
