Tundra 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1280002.png)
Location of Cowl Wire
Repair Procedure
1.
Remove Front Door Scuff Plate LH.
A.
Standard cab:
Remove the 5 screws and front door scuff plate LH.
B.
Access cab:
Remove the 4 screws and front door scuff plate LH.
2.
Remove Cowl Side Trim LH.
A.
Remove the bolt.
B.
Disengage the 2 clips and remove the clip and cowl side trim LH.
3.
Remove Lower Finish Panel.
A.
Remove the 2 screws for the hood lock release lever.
