Tundra 4WD V8-4.7L (2UZ-FE) (2003)
REMOVE BACK PANEL UPPER GARNISH
Insert a screwdriver between the back panel upper garnish and body panel to remove the back panel upper garnish.
15. REMOVE QUARTER TRIM
a. Standard cab:
Remove the bolt and front seat outer belt floor anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
b. Access cab:
Remove the bolt and rear seat outer belt floor anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
c. Using a screwdriver, remove the quarter trim belt hole cover.
d. Standard cab:
Using a screwdriver, remove the cap.
e. Standard cab:
Unfasten the bolt and remove front seat outer belt shoulder anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)