Tundra 4WD V8-4.7L (2UZ-FE) (2003)
f.
Access cab:
Using a screwdriver, open the cap.
g. Access cab:
Unfasten the bolt and remove rear seat outer belt shoulder anchor.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
h. Insert a screwdriver between the quarter trim and body panel to remove the quarter trim.
i.
Employ the same manner described above to the other side.
16. REMOVE ROOF HEADLINING
a. Remove the 2 screws and 2 sun visor holders.
b. Standard cab:
Remove the 2 clips and roof headlining.
c. Access cab:
Remove the 3 clips and roof headlining.
INSTALLATION
Installation is in the reverse order of removal.