Tundra 4WD V8-4.7L (2UZ-FE) (2003)
/Page-846001.png)
Brake Caliper: Service and Repair
Removal and Installation
REMOVAL
1. REMOVE FRONT WHEEL
Remove the wheel and temporarily fasten the disc with hub nuts.
Torque: 113 Nm (1,150 kgf-cm, 83 ft. lbs.)
2. DISCONNECT BRAKE LINE
Using SST, disconnect the brake line. Use a container to catch the brake fluid.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
