Tundra 4WD V8-4.7L (2UZ-FE) (2003)
1.
Remove the engine under cover.
2.
Drain the engine coolant.
3.
Remove the intake air connector assembly.
4.
Remove the radiator fan shroud.
5.
Remove the drive belt, fan, fluid coupling, and fan pulley.
6.
Without disconnecting the power steering fluid lines, remove the power steering pump.
HINT:
Suspend the power steering pump securely.
7.
Remove the drive belt idler pulley.
8.
Remove the right hand (RH) No. 3 timing belt cover.
9.
Remove the No.2 timing belt cover.
10.
Without disconnecting the A/C refrigerant lines, remove the A/C compressor from the mounting bracket.
HINT:
Suspend the A/C compressor securely.
11.
Disconnect the A/C compressor mounting bracket.