Tundra 4WD V8-4.7L (2UZ-FE) (2003)
Specified amount: 600 ± 50 g (21.16 ± 1.76 oz.)
2. DISCONNECT LIQUID TUBE
5VZ-FE Shown
a. Using SST, remove the piping clamp.
SST 09870-00025 (Liquid tube)
1. Insert SST to piping clamp.
HINT: Confirm the direction of the piping clamp claw and SST using the illustration showing on the caution label.
2. Push down SST and release the clamp lock.
NOTE: Be careful not to deform the tubes, when pushing SST.
3. Pull SST slightly and push the release lever, then remove the piping clamp with SST.
4. Remove the piping clamp from SST.
b. Disconnect the both tubes.