Tundra 4WD V8-4.7L (2UZ-FE) (2003)
a. Clean and install the oil drain plug with a new gasket.
Torque: 39 Nm (400 kgf-cm, 29 ft. lbs.)
b. Fill with fresh engine oil.
Capacity
c. Reinstall the oil filler cap.
HINT: Install the oil filler cap facing the direction as shown in the illustration.
5. START ENGINE AND CHECK FOR ENGINE OIL LEAKS
6. RECHECK ENGINE OIL LEVEL
7. w/ Oil filter change: REINSTALL ENGINE UNDER COVER