Tundra 4WD V8-4.7L (2UZ-FE) (2003)
Remove the bolt, stud bolt and camshaft position sensor.
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
Install the camshaft position sensor with the bolt and stud bolt
Torque: 7.5 N.m (80 kgf.cm, 66 in.lbf)
2. INSTALL LH NO.3 TIMING BELT COVER
3. INSTALL DRIVE BELT
4. FILL ENGINE COOLANT
5. CHECK ENGINE COOLANT FOR LEAKS
6. CHECK IGNITION TIMING