Tundra 4WD V8-4.7L (2UZ-FE) (2003)
7. DISCONNECT NO. 2 VEHICLE SPEED SENSOR CONNECTOR
8. REMOVE NO. 2 VEHICLE SPEED SENSOR
a. Remove the bolt and No. 2 vehicle speed sensor.
b. Remove the O-ring from the No. 2 vehicle speed sensor.
9. INSTALL NO. 2 VEHICLE SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the No. 2 vehicle speed sensor.
b. Install the No. 2 vehicle speed sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
10. CONNECT NO. 2 VEHICLE SPEED SENSOR CONNECTOR