Tundra 4WD V8-4.7L (2UZ-FE) (2003)
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and Installation of the airbag sensor assembly.
AIRBAG SENSOR FRONT
INSPECTION
VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check.*
VEHICLES INVOLVED IN COLLISION
a. Do a diagnostic system check.*
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following
items even if the airbag was not deployed:
-
Bracket deformation
-
Paint peeling off the bracket
-
Cracks, dents or chips in the case
-
Cracks, dents, chipping and scratches in the connector
-
Peeling off of the label or damage to the serial number
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision (Replace both the left and right airbag sensors.).