Tundra 4WD V8-4.7L (2UZ-FE) (2003)
/Page-1224001.png)
Impact Sensor: Service and Repair
Replacement Requirements
REPLACEMENT
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision (Replace both the left and right airbag sensors.).
-
If the front airbag sensor has been found to be faulty in troubleshooting.
-
If the front airbag sensor has been found to be faulty during checking items.
-
If the front airbag sensor has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the front airbag sensor.
