Tundra 4WD V8-4.7L (2UZ-FE) (2003)
/Page-940010.png)
b. Using SST, remove the coil assembly. SST 09950-40011 (09951-04020, 09952-04010 09953-04020, 09954-04010, 09955-04071,
09957-04010, 09958-04011)
c. Remove the generator washer.
5. REMOVE ROTOR FROM DRIVE END FRAME
REASSEMBLY
1. INSTALL ROTOR TO DRIVE END FRAME
a. Place the drive end frame on the pulley.
b. Install the rotor to the drive end frame.
2. INSTALL COIL ASSEMBLY
a. Place the generator washer on the rotor.
b. Using SST and a press, slowly press in the coil assembly.
SST 09285-76010
