Tundra 4WD V8-4.7L (2UZ-FE) (2003)
/Page-950004.png)
a. Using SST, remove the bearing.
SST 09286-46011
b. Using SST and a press, press in a new bearing.
NOTE: Be careful of the bearing installation direction.
SST 09820-00031
3. REPLACE MAGNETIC SWITCH TERMINAL KIT PARTS
a. Remove magnetic switch end cover.
Remove the 3 bolts, end cover, gasket and plunger.
b. Inspect contact plate for wear.
Using vernier calipers, measure the contact plate for depth of wear.
