Tundra 4WD V8-4.7L (2UZ-FE) (2003)
c. Coat the glass with adhesive, as shown in the illustration.
A: 8.0 mm (0.314 in.)
B: 12.0 mm (0.472 in.)
7. Slide type:
APPLY ADHESIVE
a. Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT: After cutting off the tip, use all adhesive within the time described in the table.
b. Load the cartridge into a sealer gun.