Tundra 4WD V8-4.7L (2UZ-FE) (2003)
c. Coat the glass with adhesive, as shown in the illustration.
A: 8.0 mm (0.314 in.)
B: 12.0 mm (0.472 in.)
8. INSTALL BACK WINDOW GLASS
a. Position the glass so that the reference marks are aligned, and press it in gently along the rim.
b. Using a spatula, apply adhesive on the glass rim.
c. Use a scraper to remove any excess or protruding adhesive.
HINT: Confirm that the moulding is attached to the body panel as shown in the illustration.
d. Hold the back window glass in place securely with a protective tape or equivalent until the adhesive hardens.
NOTE: Take care not to drive the vehicle during the time described in the table.