Tundra 4WD V8-4.7L (2UZ-FE) (2003)
Windshield Washer Spray Nozzle: Testing and Inspection
INSPECTION
1. INSPECT WASHER NOZZLE
a. While operating the washer, check whether the upper point where the washer fluid hits the windshield and the surge area are within the range
indicated by the hatched line.
b. Check if the lower point where the washer fluid hits the windshield is within the range of the wiping pattern (the area of the glass which is
wiped by the wiper blades).
2. ADJUST WASHER NOZZLE
Using a tool like the one shown in the illustration, change the direction of the nozzle hole to adjust the point where washer fluid hits the
windshield.