Tundra 4WD V8-5.7L (3UR-FE) (2007)
/Page-1841006.png)
14. REMOVE NO.2 ULTRASONIC SENSOR RETAINER
a. Detach the 2 claws and remove the sensor retainer from the rear bumper.
INSTALLATION
1. INSTALL NO.1 ULTRASONIC SENSOR RETAINER
a. Align the keyhole and protrusion as shown in the illustration.
b. Install the sensor retainer to the rear bumper.
NOTE: Do not damage the bumper with the protrusion when installing the retainer.
2. INSTALL NO.1 ULTRASONIC SENSOR
a. Attach the 2 claws to install the ultrasonic sensor.
