Tundra 4WD V8-5.7L (3UR-FE) (2007)
2. REMOVE TELEVISION CAMERA ASSEMBLY
a. Disconnect the television camera connector.
b. Detach the 3 clamps and remove the 2 bolts and television camera.
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart.
1. INSTALL TELEVISION CAMERA ASSEMBLY
a. Attach the 3 clamps to install the television camera with the 2 bolts.
b. Connect the television camera connector.
2. INSTALL TAIL GATE SERVICE HOLE COVER
3. CHECK TELEVISION CAMERA ASSEMBLY ANGLE
a. Move the shift lever to the R position and check the rear view image in the display has no lines or distortion and has good color.