Tundra 4WD V8-5.7L (3UR-FE) (2007)
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed are for the LH side.
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
4. REMOVE FRONT ARMREST UPPER BASE PANEL LH
5. REMOVE FRONT DOOR ARMREST COVER LH
6. REMOVE COURTESY LIGHT ASSEMBLY
7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
8. REMOVE FRONT NO.1 SPEAKER ASSEMBLY
a. Disconnect the speaker connector.
b. Remove the 4 screws and speaker.
NOTE: Do not touch the cone part of the speaker.
9. REMOVE FRONT NO.3 SPEAKER ASSEMBLY (for 10 Speakers)
a. Remove the 3 screws and speaker with bracket.
b. Detach the 3 claws and remove the speaker from the bracket.
NOTE: Do not touch the cone part of the speaker.
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.