toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Floor Speaker (For Double Cab)|Page 10208 > < Floor Speaker (For Double Cab)|Page 10206
Page 6
background image

-

The procedures listed are for the LH side.

1. INSTALL FRONT NO.3 SPEAKER ASSEMBLY (for 10 Speakers)

a. Attach the 3 claws to install the speaker to the bracket.

NOTE:  Do not touch the cone part of the speaker.

b. Install the speaker with bracket to the lower frame bracket garnish with the 3 screws.

2. INSTALL FRONT NO.1 SPEAKER ASSEMBLY

a. Temporarily install the speaker by attaching the claws of the speaker to the door panel.
b. Install the speaker with the 4 screws.

NOTE:  Do not touch the cone part of the speaker.

HINT:  Install the screws in the order shown in the illustration.

c. Connect the connector.

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
4. INSTALL FRONT DOOR ARMREST COVER LH
5. INSTALL COURTESY LIGHT ASSEMBLY
6. INSTALL FRONT ARMREST UPPER BASE PANEL LH
7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Floor Speaker (For Double Cab)|Page 10208 > < Floor Speaker (For Double Cab)|Page 10206