Tundra 4WD V8-5.7L (3UR-FE) (2007)
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed are for the LH side.
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
4. REMOVE FRONT ARMREST UPPER BASE PANEL LH (w/ Power Window)
5. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
6. REMOVE COURTESY LIGHT ASSEMBLY (w/ Power Window)
7. REMOVE FRONT DOOR ARMREST COVER LH
8. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
9. REMOVE FRONT NO.1 SPEAKER ASSEMBLY
a. Disconnect the speaker connector.
b. Remove the 4 screws and speaker.
NOTE: Do not touch the cone part of the speaker.
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed are for the LH side.
1. INSTALL FRONT NO.1 SPEAKER ASSEMBLY
a. Temporarily install the speaker by attaching the claws of the speaker to the door panel.
b. Install the speaker with the 4 screws.
NOTE: Do not touch the cone part of the speaker.
HINT: Install the screws in the order shown in the illustration.
c. Connect the connector.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
3. INSTALL FRONT DOOR ARMREST COVER LH
4. INSTALL COURTESY LIGHT ASSEMBLY (w/ Power Window)
5. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
6. INSTALL FRONT ARMREST UPPER BASE PANEL LH (w/ Power Window)