Tundra 4WD V8-5.7L (3UR-FE) (2007)
b. Remove the speaker and disconnect the connector.
NOTE: Do not touch the cone part of the speaker.
7. REMOVE FRONT NO.2 SPEAKER ASSEMBLY RH
a. Remove the 2 bolts.
b. Remove the speaker and disconnect the connector.
NOTE: Do not touch the cone part of the speaker.
INSTALLATION
1. INSTALL FRONT NO.2 SPEAKER ASSEMBLY RH
a. Connect the speaker connector.
b. Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
c. Install the speaker with the 2 bolts.
NOTE:
-
Do not touch the cone part of the speaker.
-
When installing the speaker to the instrument panel, be careful that the wires do not get caught between the parts.
2. INSTALL FRONT NO.2 SPEAKER ASSEMBLY LH
a. Connect the speaker connector.
b. Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
c. Install the speaker with the 2 bolts.